Welcome to our Online Store!

Cisco Certified: ADSL Wireless Router Setup Method

2018-05-28 14:55:47

Cisco Certified: ADSL Wireless Router Settings

Right-click on the "My Network Places" on the desktop and select "Properties" from the pop-up menu. Under the "Configuration" tab, select "TCP/IP……" (where the ellipsis information is based on your personal computer network card), then click "Properties"

to pop up "TCP/IP" Properties window, in the TCP/IP Properties window, select the Specify IP Address option on the IP Addresses tab. Enter the IP address of the network card such as: 192.168.1.14, Subnet Mask 255.255.255.0 Wireless Router Settings Method (The example IP address here is mainly for the purpose of leaving the factory with ADSL. The address is the same, you can set the ADSL IP address as needed in the configuration screen.

Select the “Gateway” tab, enter the IP address of the gateway 192.168.1.1 (this address is the default address of ADSL), single Click Add, select the DNS Configuration tab, and select the Enable DNS option. Enter the IP address of the DNS server in the "DNS server search" field. Click "Add" to add it to the above settings for the WIN9X system. The WINNT system looks down!

Continuing from Step 2: The TCP/IP Properties window appears. In the TCP/IP Properties window, select the Specify IP Address option on the IP Addresses tab. Enter the IP address of the network card such as: 192.168.1.14, subnet mask 255.255.255.0, gateway: 192.168.1.1 (this is the default value of the Modem), and then enter the IP address of the DNS server.

Finally click "OK" to return to the "Network" dialog box. Click the "Confirm" button in the "Network" dialog box to exit (9X system can restart the machine, NT system is not used, suitable for DB102DB102-ADB102-BDB108 router setting method. By just set up After the network card, open the browser and press the key in the address bar.After the carriage return, the login dialog box pops up, enter the user name admin and password dare (this is the default value, if you use this to enter, please contact your local dealer and Telecommunication)

ADSL Wireless Router Setup: WAN Settings

Disable 1-7 "virtual circuits". Here is an example of a virtual circuit in Guan 1. The method is in the "WAN". Select "virtual circuit" in the settings 1 press "submit", then "enable" select "NO", and then press "submit" to complete, and others do so.

will be 0 virtual circuit "Enable" is set to "Yes"

Address: Room110,No.389 Jinwan Road,Shanghai,China

Email: daisy.dai@ccitel.com
service time: 7x24 hour

CCIT ICT PRODUCTS