Welcome to our Online Store!

How are the routers set up and how the 192.168.0.1 routers set up

2018-01-04 12:28:27

192.168.0.1 set

192.168.0.1 router how to set up the router?Sums up net friend asked small make up this problem, small make up, share with you the steps.To complete the 192.168.0.1 router Settings, in three steps: 1, the device to connect.2, IP address Settings.3, online accounts and other parameter Settings.Equipment connection: D - the Link routing on a total of 5 cable interface, four is the LAN interface, and a WAN/Internet interface.Also, pay attention to the problem of how to set the password 192.168.0.1 router.Connected

- d -

the first step: the Link routing on a total of 5 cable interface, four is the LAN interface, used to connect computers, four LAN interface to any one will do.There is also a WAN/Internet interface, which is used to connect the modem or community broadband interface.

ps: attention must plug the Internet line connected to the computer in the LAN interface, otherwise unable to open 192.168.0.1 landing pages, many users in this step wrong.

the second step: IP address set

must be the IP address of the computer configuration in the 192.168.0.2-192.168.0.254 this range of an address, otherwise unable to properly configure 192.168.0.1 router.Different computer system is slightly different in the operation, the following will introduce respectively the XP, Windows 7 and Windows 8 system IP address under the setup method.

the third step: Windows XP computer IP address set up

steps 1, mouse right click "Online neighbors ">Select Properties throughout the &;Open Local connection ".Step 2, right click the mouse and other

Local connection ">Select Properties throughout the &;.Step 3, click &

otherInternet protocol (TCP/IP) ">Click Properties throughout the &;.Step 4, select

Automatically obtain IP address "And "Obtain DNS server address automatically ">Click Identify ".

the third step: Windows 7 computer IP address set up

steps 1, right-click the desktop or start the program Network ">Select Properties throughout the &;>Click Change adapter Settings "Open Local connection ".

in step 2, click Change adapter Settings ".Step 3

mouse right click "Local connection ">Select Properties throughout the &;.Step 4, select

Internet protocol version 4 (TCP/IPv4) ">Click Properties throughout the &;.Step 5, select

Automatically obtain IP address "And "Obtain DNS server address automatically ">Click Identify ".

the third step: Windows 8 computer IP address set up

steps 1, at the same time, the keyboard is installed above the Windows (lower left CTRL and Alt in the middle of the keyboard keys) + R two key, open the interface of the program, >Input Ncpa. Cpl”>Click Identify ", open Ethernet "Configuration screen.Step 2, right click the mouse and other

Ethernet ">Select Properties throughout the &;>Select Internet protocol version 4 (TCP/IPv4) ">Click Properties throughout the &;(or double click Internet protocol version 4 (TCP/IPv4) throughout the &;).Throughout

step 3, check the &;Automatically obtain IP address "And "Obtain DNS server address automatically "Option >Click "Identify ".Step 4:

online accounts and other parameters are set up

steps 1, input 192.168.0.1 cotton in the browser, and then press the enter key, open the landing page 192.168.0.1.

steps, enter the default management account: admin, password: admin password (or empty).Step 3, click on the left side of the

Setup wizard ".Step 4,

click The next step "Step 1 set.Step 5

first enter a The old password ">The new password ">Confirm the new password ">The next step ".Step 6,

Select time zone ", generally choose Beijing time >The next step ".Step 7

select Pppoe”>The next step ".

steps 8, input broadband operators offer to your online account and password, then click The next step ".Step 9,

set up wireless wi-fi: fill in Wireless network ID”(that is, the name of the wi-fi) >WEP security way "Suggest to choose WPA or connected >Fill in Password "(wi-fi connection verify password) >Click The next step ".Step 10,

click Throughout the reactivation &;Is just the Settings to take effect.

through the above steps in detail, can solve the problem of how to set the 192.168.0.1 router, about the various problems in set, this paper has been given in detail, please read carefully set.Also, note that the password Settings.Set other related questions about the router, small make up recommend reading in the reading, hope to give you help.Related:

192.168.1.1 landing page address

192.168.1.1 router set

wireless router how to set up the lei families wireless router set

Address: Room110,No.389 Jinwan Road,Shanghai,China

Email: daisy.dai@ccitel.com
service time: 7x24 hour

CCIT ICT PRODUCTS