router how to set up automatic dial-up is ordinary users using a broadband Internet account for more than one computer with access to the network of the most commonly used method, so how to build a Shared online environment?Let's take a look at the specific content in more detail below.After
set up his own share Internet problem also ensue, users want to realize the function of every time I start the computer can automatically connect to the Internet, rather than every time must be connected to a network into the router interface point to get to the Internet, online must point break when don't want to get to the Internet.Actually off this automatic network and the function of automatically connect to the Internet is a very good implementation, if there is no broadband routers can put my dial-up in the Windows system startup to implement;If it is after bought their own D - LINK router to seek solutions, then we can set D - LINK broadband router to achieve the purpose of this automatic dial-up and automatic wire break.
1, how to set up the router automatically dial the low-end of the broadband router Settings:
broadband router price is cheaper if you buy or to buy an earlier time, so he on the function is relatively low.We can only achieve the function of he automatically connect to the Internet and other advanced features could not be achieved, the specific method is as follows.
the first step: to connect through broadband router management address, enter the correct user name and password to enter the management interface.
the second step: we from the left in its management interface WAN”Start button.
the third step: use left key of mouse on the left side of the pointWAN”Button after we have entered the WAN interface Settings interface, this is the place where set ADSL account information, we can see at the end there is a parameter setting, called Automatic back online ", if the activation of the router will under the condition of the open power supply automatic dial-up and connect to the Internet, if the parameter is Shut down "Will not have any automatic dial-up connection.Because we want to be able to realize the function of automatic dialing, so set it to Activate ", then click the lower right Perform "Button to save the Settings.(as shown in figure 1),
in the fourth step: after the reactivation of the broadband router, whenever we turn on the device's power, he will automatically dial and connect to the Internet, so as to realize the function of automatic online, from the operation of user manual dialing.
but the automatic dialing setting is not strong, such as when we are not using monthly account, every time is don't want to open the power supply is connected to the network automatically.We hope on-demand dialing, such as when the computer has access to the network request again dial, or set a fixed time automatic dial-up and some time disconnected, meet these high-level requirements, we adopt low-end and early can't competent for the broadband router.
2, how to set up automatic dial-up router method of multifunction broadband router Settings:
if you are recently for a period of time to buy a wireless broadband router or directly buy function of wireless routers, the devices for automatic dialing, on-demand dialing function is very powerful.To realize automatic dialing operation is very simple, specific steps are as follows.
the first step: to connect through broadband router management address, enter the correct user name and password to enter the management interface.Step 2:
on the left side of the point with the mouse clickWAN”Button after we have entered the WAN interface Settings interface, this is the place where set ADSL account information such as, WAN port Settings except we often say that account Settings, also requires us to set up the connection mode.
the third step: there are many types of connection mode, we simply introduce.The first is "On-demand connection , he is to connect automatically when have access to the data, how many minutes can be set at the same time wait for no data transmission is automatically disconnected.The next is Automatic connection "This option allows us to start up and automatically connected after the break, and the automatic connection function as we mentioned earlier, as long as the router on the power automatic dial-up connection.
here is Timing connection ", he will automatically connected within a specified time period, we can set up his connection time part from what time to what time part, this network will be automatically connected and interrupt;Finally the manual connection, only the user login to the router management pastry Connection "Button will dial-up access to the network, only the same user manual point Bolt "Dial button will interrupt to say goodbye to the network.We according to their own requirements to connect mode Settings, finally don't forget to point Save "Button to make the changes to take effect.The end of the
3, how to set up automatic dial-up router:
either way connection mode, can implement automatic dial-up and broadband routers have a purpose to connect to the Internet.Although based on D - LINK router is introduced as an example, but basically each router has function of automatic dialing and connected to the network, users only need to the WAN interface Settings to find.Believe that through the automatic dial-up connection function can make us more free to enjoy the joy of the game of broadband network.