Welcome to our Online Store!

How to solve the problem that the 192.168.1.1 router can't do

2018-01-05 10:54:01
Method one:

set up the network connection

here introduces the Windows XP system, for example, Windows 7, and 8 system setting method in the same way.

1, right-click Online neighbors ">;Click Properties throughout the &;

2, right-click Local connection ">;Click Properties throughout the &;

3, selection Internet protocol (TCP/IP) ">;Click Properties throughout the &;Or double-click on the

3, selection Automatically obtain IP address "And "Obtain DNS server address automatically ">;Click Identify ".

method 2: correct installation TP - Link

1, Internet access, telephone lines, wireless router: please prepare two short cables, a cable used to connect ADSL Modem (cat) and TP - Link wireless router WAN interface;Another cable used to connect TP - any Link on the router LAN interface (1/2/3/4) and the computer.

2, Internet access, optical fibers, : please prepare two cables, a cable used to connect light cat and TP - Link the WAN interface of the router;Another cable used to connect TP - any Link on the router LAN interface (1/2/3/4) and the computer.

3, cable entry on the Internet: please prepare 1 Internet line, the broadband operators offer first enter a network cable plugged in TP - Link the WAN interface of the router;To prepare himself cable, connect the computer, the other end is connected to the TP - any Link on the router LAN interface (1/2/3/4).

method 3: replace the browser

please change a browser, and then in the browser's address bar, enter 192.168.1.1 to log in and see if I can open it.

method 4: replace the cable

please change to a line, with a new cable to connect computers with TP - Link the router LAN interface (1, 2, 3, 4);Then can test in the browser open TP - Link router 192.168.1.1 login page.

five methods: reset the router after

if using the four methods, still can't open the TP - Link wireless router 192.168.1.1 login page;You can put the TP cc-link wireless router to factory default (reset).

Reset method: in the TP - Link router plugged in, then long press the router interface beside the Reset hole (button) 10 seconds, can restore the factory Settings (Reset).Method six:

if you open the browser Settings browser pop-up dial-up connection, please click Set up "- select Never use dial-up connection "- Identify "Then log back in.If not pop up when open the IE browser dial-up connection, this step can be ignored.

seven methods: offline work of

if the browser pop-up offline work, open a browser choice File "- cancellation Work offline "In front of the hook.If not pop up when open the IE browser to work offline, this step can be ignored.

after

if several methods according to the appeal set attention problem, still can't open the TP cc-link wireless router set url 192.168.1.1, chances are your TP - Link wireless router fails, please change to a wireless router!!!!!!!!!!!

.

warm prompt use Broadband connection "Before dial-up users, set up the router must disconnect broadband connection, make sure that the computer connecting the short_net thread to the 1/2/3/4 arbitrary interface of the router, and then in the open the IE browser is not connected to the input 192.168.1.1.

is also set up the router, does not need to be connected to the Internet, is set without Internet;A lot of people have been think it needs to be set up a wireless router can be set to online, this is totally wrong.

Address: Room110,No.389 Jinwan Road,Shanghai,China

Email: daisy.dai@ccitel.com
service time: 7x24 hour

CCIT ICT PRODUCTS