Welcome to our Online Store!

TP-LINK Router Setup Method in Different Broadband Modes

2018-06-01 13:16:02

Many access schemes use routers, but their TP-LINK router setup methods are not the same for different access methods. Today, they use more compatibility. The TP-LINK broadband road is taken as an example to describe in detail the specific method of setting up a router under different broadband modes.

TP-LINK router settings 1, ADSL: ADSL access is divided into ADSLMODEM and ADSLROUTER, if it is ADSLROUTER, you need to change its Internet access mode to RFC1483bridge, and then connect TP-LINK router. Then log in to the TP-LINK router's WEB management interface, through the "settings wizard" to select ADSL virtual dialing, the service provider's "Internet account" and "ldquo; Internet password" fill in the appropriate, click Next That's it.

TP-LINK Router Setup 2 , VDSL: Its access settings hair style and ADSL are the same. However, in some places, you may encounter QQ, but you cannot open the webpage. This means that you need to log in to the TP-LINK router when setting up the router, and set the MTU value under the WAN port settings in the network parameters. Smaller, the default is 1492.

TP-LINK Router Setup 3 , FTTB + LAN dynamic IP + WEB certification: landing TP-LINK router WEB management interface, through the "Setting Wizard" & ldquo; Ethernet broadband, automatically obtain the IP address from the network service providers (such as: China Telecom) (dynamic IP ) & rdquo; After the setting is completed, to see whether the WAN port obtains an IP address in the running state, if it is obtained, and then enter any URL in the IE address field, the authentication dialog box will pop up, and it is used by the network service provider. Name and password are fine.

TP-LINK Router Setup 4 , FTTB + LAN static IP + WEB certification: landing TP-LINK router WEB management interface, through the "settings wizard" & "select" "Ethernet broadband, network service providers (such as: China Telecom) to provide a fixed IP address (static IP ) & rdquo; After the setting is complete, and then enter any URL in the IE address bar, the authentication dialog box will pop up, fill in the network service provider provided with username and password on it.

TP-LINK Router Setup 5 , Broadband Internet access: landing TP-LINK router WEB management interface, through the "Setting Wizard" & "Electric" broadband, automatic network service providers (such as: China Telecom) to obtain the IP address (dynamic IP) & rdquo; set to complete After the restart CABLEMODEM on it.

Address: Room110,No.389 Jinwan Road,Shanghai,China

Email: daisy.dai@ccitel.com
service time: 7x24 hour

CCIT ICT PRODUCTS