Welcome to our Online Store!

TP-Link, D-Link, ipTIME router how to restore the factory settings

2018-02-09 16:28:47

people used the router, do not know the user name and password, or your router forgot user name and password, you can return the router to the factory.Tp -

LINK method of the router to factory default:

1, the router has a small hole in front/rear panel, there were the words: Reset;

2, turning off the power of the router, to find, as the tips of the pen class objects hold Reset button;

3, give the router, wait for about 3 to 10 seconds, after waiting for M1 and M2 light flashes three times at the same time can be saved the effort, reset success;After

4, pay attention to reset the router will be restored to factory Settings.Initial account: initial address:

192.168.1.1

admin

initial password: admin

D cc-link router to factory default:

1, in the condition of the router boot, hold down the holding down the Reset button for about 2-5 seconds;

2, turn off the power supply, which still hold the Reset button in the hole;After

3, wait about 10 seconds again to let it go;

4, and then give the router a electricity, reset successfully.Initial account: initial address:

192.168.0.1

admin

initial password: admin

ipTIME router to factory default:

1, turning off the power of the router, to find as the tip of the spikes of holding down the Reset button 5-10 seconds

(or a router electricity holding down the Reset button under the condition of open and then turn the power off after 5 to 10 seconds)

2, plugged in, wait about 3 to 10 seconds, Reset the success, the router is restored to the factory.Initial account: initial address:

192.168.0.1

admin

initial password: admin

Tenda router to factory default:

1, in the router electricity normally, press and hold the RESET button, when you see SYS lights extinguished once you can let go, time at about 10 seconds.After

back to the router to factory defaults, the default management address: 192.168.0.1,

, the default user name: the default password: admin

admin

Fast or mercury router to factory default:

1, in the case of a router to normal electricity, use a pointed object, press the RESET button, keep pressing observation SYS lights at the same time, after waiting for about 5 seconds, when the SYS lamp by slow flashing fast scintillation state, said the router has successfully restore factory Settings, at this point you can loosen the RESET button.After

back to the router to factory defaults, the default management address: 192.168.1.1,

, the default user name: the default password: admin

admin

above seems to say is a wireless router, O (& cap;_ & cap;)O ~

Address: Room110,No.389 Jinwan Road,Shanghai,China

Email: daisy.dai@ccitel.com
service time: 7x24 hour

CCIT ICT PRODUCTS