Welcome to our Online Store!

The difference between AP, routing, relay, bridging, and client mode

2018-01-02 14:20:03

AP, routing, relay, Bridge, the difference between Client mode in TP -

Link on mini wireless Router generally have the AP (access point) mode, the Router (wireless Router) mode, the Repeater (relay) model, Bridge (Bridge) mode, the Client (Client) mode;But many users do not know the difference between the several kinds of mode, the following will make a detailed introduction to the several patterns.Some types of TP -

note: Link on mini wireless Router only AP (access point) mode, the Router (wireless Router) mode, the Repeater (relay) the three mode.

ap (access point) model

ap (access point) mode, the only need to plug a can surf the Internet cable on 192.168.1.253 router, can go online without any configuration;But need to pay attention to this time 192.168.1.253 router wireless network unencrypted, suggest to set up a wireless password.

application places: such as hotels, hotel or other provides a place for Internet surfing the Internet.

the Router (wireless Router) model

in the Router (wireless Router) mode, 192.168.1.253 Router is equivalent to an ordinary wireless broadband Router;Need to connect ADSL Modem (cat) or optical devices such as cat to configure.Application places:

users themselves to handle the use broadband business cases.

repeater (relay) model

repeater (relay) mode, 192.168.1.253 the router through wireless way to establish connection with a wireless router that allow users to surf the Internet, Internet access is used to amplify the wireless router wireless signal;Note: the name of the wireless signal after amplification and identical the original wireless router's wireless signal.

application places: there is a wireless router can surf the Internet, but the wireless router wireless signal coverage of the cable, hope the wireless signal can cover a wider range.

bridge (bridge) model

repeater (relay) mode, 192.168.1.253 the router through wireless way to establish connection with a wireless router that allow users to surf the Internet, Internet access is used to amplify the wireless router wireless signal;Note: the name of the wireless signal and enlarge the original wireless router is not the same as the name of the wireless signal.

application places: there is a wireless router can surf the Internet, but the wireless router wireless signal coverage of the cable, hope the wireless signal can cover a wider range.

client (client) mode

client (client) mode, 192.168.1.253 router is equivalent to a wireless network card, used to receive other wireless router wireless signal;Computers can only through the wiring to use 192.168.1.253 router.Near

application places: the wireless signal, and the user know that the wireless signal password, the user's desktop computers to connect to the wireless signal to get to the Internet.

friendship prompt: Repeater (relay) model and the Bridge (Bridge) model is through the way of wireless Internet can connect to a wireless router, zoom in on the wireless router wireless signal;Difference is that a Repeater (relay) model down the big name of the wireless signal is the same as before on a router, and the Bridge (Bridge) model name and before the router wireless signal after amplification on the wireless signal is a different name.

Address: Room110,No.389 Jinwan Road,Shanghai,China

Email: daisy.dai@ccitel.com
service time: 7x24 hour

CCIT ICT PRODUCTS