Welcome to our Online Store!

Unicom network set-top box how to install and debug, Unicom network set-top box debugging methods

2018-01-11 12:55:18

set-top boxes for all of us are very familiar with, and each house has its own set-top boxes.And the set-top box is a digital set-top box.Set-top box besides digital set-top boxes and Internet set-top boxes.For network set-top box understanding friend is not much.Not to mention the network installation and debugging of the set top box.Then for the home to have a friend network set-top box is very want to know what network installation and debugging of the set top box, share below small make up to you about network installation and debugging of the set top box.

unicom network how set-top box installation using

set-top box generally divided into the two-step, a first step, connect the TV, the second step is to choose the signal source, the third step, to connect to the Internet, let's step by step operation.

the first step, first you need to connect your TV set-top boxes with unicom network.You have two choices, first use the AV interface connects televisions and set-top box, also can use HDMI hd line connection or TV.

the second step, if you choose the AV interface connected TV, so you can choose video (AV) signal source;If you choose the HDMI connection television, then select the TV signal input interface should choose HDMI input (if you don't know what is AV interface, HDMI interface, it doesn't matter, in detail below).

the third step, using cat pull a wiring unicom network television set-top boxes, or from the television was pulled a thread connection router, the cat in the set-top box through wired or wireless router connection.

if you choose to wiring boxes, so don't need to input password to use, and stable speed, if you choose to set-top boxes, wireless network connection speed may not be stable, but will be very convenient, unicom network connected TV set-top boxes to any room can use.

note: wireless network connection to the set-top box will need to input password online, this is we should enter the router Internet password, rather than unicom online account password.Unicom

set-top box password

unicom network set-top box without password?Many netizens use unicom network set-top box will encounter such a problem, you can look at the instructions, if is set up on its own, manual will have prompt, factory password is usually 123456 or 000000;If you want to set up by oneself, open the main menu ——System Settings ——Parental control ——Set the password ——Ok.

if you don't know the Internet account, the password is that you give when dealing with broadband dial-up account and password (on unicom acceptance form to your business, yellow or blue paper has).

unicom network set-top box WIFI password change

on a computer browser address bar (such as IE) input: 192.168.1.1 or 192.168.0.1 premise is your computer connected to the router, and then select the wireless Settings, modify the inside of the Internet password, set-top boxes and unicom network online password is the new password has been modified (router Internet password is the online password) set-top box.More than

set-top box is to give everyone sharing details about network installation and debugging, we hope our share to be of service, especially for network set-top boxes do not understand friend, more should pay more attention to our share content.Because the network set-top box at the time of use and installation is very troublesome.Many friends at the time of installation and use very easy to get wrong, and that we have to share about network installation and usage of set-top box is very detailed, hope everyone can refer to our share content, for installation and use.

Address: Room110,No.389 Jinwan Road,Shanghai,China

Email: daisy.dai@ccitel.com
service time: 7x24 hour

CCIT ICT PRODUCTS